Skip to content

Electric Shocks | Electrical Engineering Tutorials

Practical Electrical Guide and Industrial Solutions

  • Home
  • Blog
    • Electrical Engineering
    • Electronics Engineering
    • Electrical Installation
    • Solar Energy
    • MCQs
    • Books
  • Graph Plotter
  • Calculators
  • Services
    • Forum
    • Other Services

Theorem

The basic electrical theorem can be applied to the solution of the electrical networks. Electrica circuit theorem can also be applied to AC circuits with one condition. The condition is to replace the ohmic resistance with impedance.

The Electrical Circuit theorem help find the mathematical relationship between the currents, voltage, and resistances of the circuits. Theorem uses the basic mathematical rules to analyze the electrical circuit theoretically.

These fundamental theorems include the basic theorems like Superposition theorem, Tellegen’s theorem, Norton’s theorem, Maximum power transfer theorem, and Thevenin’s theorems. Another group of network theorems that are mostly used in the circuit analysis process includes the Compensation theorem, Substitution theorem, Reciprocity theorem, Millman’s theorem, and Miller’s theorem.

PSpice for circuit theory and electronic devices by Paul Tobin

October 31, 2026August 17, 2018 by Gul Faraz
Circuit theory and Electronic devices

PSpice for Circuit Theory and Electronic Devices is one of a series of five PSpice books and introduces the latest Cadence Orcad PSpice version 10.5 by simulating a range of DC and AC exercises.

Categories Engineering Book & PDFs Tags Theorem

Engineering Circuit Analysis 8th Edition by William Hart Hayt

August 8, 2025July 29, 2018 by Gul Faraz
Engineering Circuit Analysis by William Hart Hayt Eighth 8th edition

The textbook written by William Hart Hayt, The Engineering Circuit Analysis Eighth Edition (8Th), is mainly focused on students learning themselves.

Categories Engineering Book & PDFs Tags Control System, Theorem

Explain Superposition Theorem Example and Solution

August 10, 2025June 21, 2018 by Gul Faraz
Superposition Theorem Principle

Superposition Theorem state that the voltage across an element in a linear electric circuit is the algebraic sum of the voltages across that element due to each independent source acting alone.

Categories Circuit Analysis Tags Theorem 7 Comments

Star to Delta and Delta to Star Conversion Formula Calculator

October 26, 2026June 12, 2018 by Gul Faraz
Star Delta Transformation

Star Delta Transformations and Delta Star Transformations allow us to convert resistances or impedances connected together at three different nodes from one type of connection to another and vice versa.

Categories Circuit Analysis Tags Electrical Engineering Calculators, Parallel Connection, series connection, Theorem

Norton Theorem with Examples: How to Use Norton Theorem?

February 23, 2026June 1, 2018 by Gul Faraz
Norton Theorem

Norton Theorem reduces any two port circuit to a Norton Resistor, a load resistor, and a current source in parallel. Where Thevenin Theorem incorporates voltage source in series.

Categories Circuit Analysis Tags Current Source, Theorem 2 Comments

Kirchhoff’s Current Law (KCL) with Example: Circuit Analysis

August 10, 2025May 25, 2018 by Gul Faraz
Kirchhoff's current Law example

Kirchhoff Current Law (KCL) state that the current entering a node is always equal to the current leaving the node.

Categories Circuit Analysis Tags Theorem

How to Apply KVL (Kirchhoff Voltage Law) in Circuits with Examples

November 2, 2026May 24, 2018 by Gul Faraz
Kirchhoff's voltage law KVL Infographics

Gustav Kirchhoff was a German physicist, who presented two laws; Kirchhoff’s Current Law (KCL) and Kirchhoff’s Voltage Law (KVL). Ohm law is a very basic one, which may not be sufficient to analyze a complex circuit.

Categories Circuit Analysis Tags Theorem

Nodal Analysis with Example: Electric Circuit Analysis

February 23, 2026May 24, 2018 by Gul Faraz
Nodal Analysis

Nodal Voltage Analysis is the application of KCL at every node of the circuit. The nodal analysis uses the node voltage as a basic parameter.

Categories Circuit Analysis Tags Theorem

What are you looking for?

You may like to know

  • Off-Grid Solar System: A Complete Guide for Your Home
  • A Guide to Sourcing Cable Ties for Electrical and Industrial Setups
  • Circuit Breaker Keeps Tripping: Causes and How to Fix It
  • Solar Panel Roof Calculator: How Many Solar Panels Can Fit on Your Roof?
  • The Quickest and Easiest Way to Save Money on Energy Bills
  • What Is the Best Way for a VFD to Make Money?
  • What Are the Best Digital Linear Bench Power Supplies?
  • Energy Bill Calculator: How Energy Bills Are Calculated
  • Electrical Panel Upgrade: 10 Signs Your Home May Need One
  • Charging EV: A Beginner’s Guide to Electric Vehicle Ownership
© 2026 Electric Shocks | Electrical Engineering Tutorials • Built with GeneratePress