## Resistor Color Codes Calculator and Calculate Resistor Color Code Manually

Resistor color coding is the system for representing the rating of the component by marking different color bands over the packing. It is also used for capacitor, inductor, and diode but most commonly for resistors.

## Explain: What is Resistor and Different Types of Resistors

A resistor is a passive circuit element which decreases the current flow and/or drops the voltage on purpose. There are two common types of resistor; fixed and variable resistors.

## Electronic Devices and Circuit Theory by Robert Boylestad

For upper-level courses in Devices and Circuits at Electrical and Electronic Engineering universities. This text, highly accurate and thoroughly written, has set the standard in electronic devices and circuit theory for over 25 years.

## All-New Electronics Self-Teaching Guide by Harry Kybett & Earl Boysen

All new electronics self-teaching guide is intended for self-learner with high speed. The book featuring great question-answer format, self-test at the end of each chapter and illustrative experiments.

## Explain Superposition Theorem Example and Solution

Superposition Theorem state that the voltage across an element in a linear electric circuit is the algebraic sum of the voltages across that element due to each independent source acting alone.

## Fundamental of Electrical Engineering by Giorgio Rizzoni

Fundamental of electrical engineering is written by Giorgio Rizzoni, comprising the basics of electrical engineering and extending to electronics and system analysis.

## Difference between Ideal and practical, Voltage and Current Source

In contrast to a practical voltage source, an imaginary deal source provide constant voltage regardless of load current because of no internal resistance. While ideal current source provides a constant current regardless of load current.

## Star to Delta and Delta to Star Conversion Formula Calculator with Example

Star Delta Transformations and Delta Star Transformations allow us to convert resistances or impedances connected together at three different nodes from one type of connection to another and vice versa.