## Diode Voltage Doubler Circuit with Tripler and Quadrupler Explained

Voltage Multipliers are electric circuits to increase the voltage by a factor of two, three or four in case of Voltage Doubler, Tripler or Quarple respectively. The Voltage multiplier circuit uses capacitors and resistors to enhance the voltage level.

## Full Wave Bridge Rectifier with Capacitor Filter Design Calculation and Formula

The Bridge type full wave rectifier can convert an AC to DC by the mean of four diodes in such configuration that the output peak voltage remains equal to secondary of transformer peak. In each half cycle, a set of two diodes conduct and block the current alternately.

## Half wave Rectifier with a Capacitor Filter and Ripple Factor Calculation

Rectifiers are the circuit which converts AC Voltage to DC voltage. The half wave rectifier is the simplest type of rectifier with a single diode. The output of the rectifier is filtered with a capacitor filter to smoothen.

## Forward Bias Diode and Reverse Bias Diode Characteristic Graph

A diode can be connected in forward and reverse bias with a source. In Forward bias connection, a diode conducts current like a closed switch. Where in reverse bias, a diode blocks current like an open switch.

## Depletion Region formation in PN Junction diode and potential barrier

At the time of developing the PN junction diode, the depletion region is formed. Where free electrons and hole cross the conjunction between P- and N-region and recombine.

## Difference between intrinsic and extrinsic semiconductors: P-Type and N-Type

A semiconductor is a type of electrical material, which is used in electronic devices like PN junction diode, transistor and many more a replacement for a vacuum tube. The semiconductor can be intrinsic or extrinsic, where extrinsic has N-type and P-type.

## Difference between Electrical Conductor, Semiconductor, and Insulator

Based on electrical resistivity, a material can be divided into three types: conductor, insulator, and semiconductor.

## Inductor Charging and Discharging in RL Circuit Analysis Equations

In RL series circuit, during the inductor charging phase, the voltage across the inductor gradually decrease to zero and the current through the inductor goes to the maximum in five-times constant (5 taus).

## The Voltage across the Inductor: Energy Stored in Inductor

An inductor is a passive circuit element that stores energy in the form of a magnetic field. Inductors are made of wrapped conducting wires or coils, to enhance the effectiveness of the inductor number of turns is increased. The inductance of an inductor increases with increasing the number of turns. An inductor is not anticipated …

## How do Capacitors Add in Series: Capacitor in the Series Calculator

Capacitors can be connected in series to achieve the desired capacitance. The capacitance of series connection decreases and that of parallel connection increases.