Voltage and Current Divider Rule Formula Calculator (VDR and CDR)

The Voltage Divider Rule formula (VDR) shows how the voltage distributes among different resistors in a series circuit. Similarly, the Current Divider Rule formula (CDR) shows how current is distributed in a parallel circuit.

VDR and CDR Formulas are the voltage and current distribution tools in series and parallel circuits.

Each resistor in a series combination has a different voltage drop across it. The individual voltage drop of resistors adds up to the source voltage. The current for the series circuit remains the same throughout the divider circuit as discussed earlier.

In a parallel resistor, the voltage across each resistor is the same as the source voltage. But current divides such that the summation of individual resistor current is always equal to the source current.

voltage and current divider rule formula

Voltage Divider Rule Formula:

In the previous post, series combination, we solved the electrical circuit shown and found the following parameters for the circuit.
V1 = 40 volts
V2 = 80 volts
V3  = 20 volts
Where the source voltage applied to the circuit is 140 volts.

Resistors in series

By looking closely at these numbers, you will observe that the voltage drop is different from each other and the summation of all of them is equal to the voltage applied to that circuit (source). The question is, how do these voltages relate to each other? The answer is the Voltage Divider Rule Formula. Kirchhoff’s Voltage Law also states the same thing.

Voltage Divider Formula:

According to VDR, it holds the following ratio.

Where V1 is the voltage drop across the resistor R­1, VT is the total voltage applied to the circuit and R­T­­ is the equivalent resistance of the circuit.

Suppose the above series circuit is such that we are interested in finding voltage drop V3 across R3. The VDR formula for V­3 will be:

By putting the corresponding values, we get:

V­­ is the same as we calculated in the previous section using Ohm’s law.

Now, let me find the voltage V2 across the R­2­­. The calculation will be:

Similarly, for V1 the voltage drop across R1 will be:

Voltage Divider Calculator:

The voltage divider rule calculator is a web-based tool for calculating voltage across resistor Rx. Where Rx is connected in series with another resistor such that their total resistance is RT. The Voltage Divider Formula Calculator calculates the voltage across Rx only based on the voltage divider equation.

Source Voltage Vs

Total Resistance RT

Resistance Rx

Voltage Vx

Current Divider Rule Formula:

In the previous post, parallel combination, we have the parallel circuit show and found the following circuit parameters.

The source voltage is the same 140 volts but because of the parallel combination, the total resistance is 5.7 Ω.

Resistors in parallel

CDR is the counterpart in a parallel electric circuit to VDR in series electric circuits. Based on the above analysis one can observe that the current of different resistors is different being attached to the same voltage source. The reason for this difference is the difference in resistance.

Current Divider Formula:

CDR formula can calculate the current flow in each resistor. The formula for the current divider is:

I1 is the branch current where R­­­1 is connected and we are interested in, IT is the total current provided by the source and R­T is the total resistance of the parallel resistor circuit.

For the circuit given, suppose we are interested in current I3 in R3 and we know the total current of the circuit from the above calculation. The formula will become for us:

We can also cross-check the calculated currents by Ohm’s law.

Current Divider Formula Calculator:

The current divider rule Formula calculator is a web-based tool for calculating current in resistor Rx. Where Rx is connected in parallel with another resistor such that their total resistance is RT. The CDR Calculator calculates the current in Rx only based on the CDR formula.

Source Voltage Vs

Total Resistance RT

Resistance Rx

Voltage Vx

Conclusion:

  • The power supply voltage divides fractionally in a series of electrical circuit
  • The power supply current divides into parallel electrical circuits partly
  • The Voltage divider rule formula is used to find the partial voltage across the individual resistor in a series circuit
  • The current divider rule formula is used to find the partial current in the individual resistor in a parallel circuit.  

Short Answer Question:

How to use two voltage divider equations?

Using two voltage divider equations involves calculating the output voltage across two resistors connected in series. Simply input the resistor values and the input voltage, then compute the output voltages separately.

How to divide current in a parallel circuit?

Dividing current in a parallel circuit is like a group decision. Each branch gets a share based on its resistance: lower resistance, more current. It’s a team effort!

2 thoughts on “Voltage and Current Divider Rule Formula Calculator (VDR and CDR)”

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.